Call us on: 0333 577 3911
Ghost Imobiliser + Tracker
Rollover to Zoom

Ghost Imobiliser + Tracker

£499.00 (inc. VAT)

NEXT GENERATION

VEHICLE PROTECTION


Ghost Vehicle Immobiliser + Vehicle Tracker

(The best of both worlds).

If you don't want the pin entry on all the time but require that extra security when leaving the car in a vulnerable location. Then the combining the Ghost Immobiliser with a Live Telematics tracking system which can remotely activated / Deactivate the ghost system via a mobile phone. With the system active, the driver will have to enter the unique pin code via the buttons on the cars steering wheel every time the car is started or the engine will not start. By deactivating the Ghost immobiliser the driver can start the car as if the system was not there, all the time the tracker stores all location and driving data 24/7. The professional tracking system comes with all the usual tracking features (click here for further details). Both systems are professionally and covertly installed by fully qualitied engineers, this is included in the price can and be done at the owners home or place of work.


"At Last A System The Thieves Can't Beat!!"


The Ghost is a unique, next generation device that secures your vehicle without the need for cutting wires or adding after-market key fobs. The device is connected to the vehicles CAN data network and a personalised PIN code is programmed into the Ghost using buttons on the dash and steering wheel.
ADVANTAGES
Engine start blocking - The Ghost will prevent the starting of the engine unless the unique, user defined PIN code has been entered first.
Undetectable using diagnostics - A modern thief can use diagnostics to detect circuit cuts on modern vehicles. The Ghost has no circuit cuts so it cannot be found using these methods.
No radio frequency signals. - Thieves cannot use sophisticated RF scanning, code grabbing technology to detect what security device your vehicle has when it does not transmit any signals like conventional security systems.
Advantages of using the CAN data network - The use of the CAN data bus has several advantages including low risk during installation, low probability of detection, and allows for placement almost anywhere in the vehicle.
Silent operation - Because the unit communicates with the ECU on thedata bus to immobilise the vehicle there is no way a thief could listen for the tell-tale clicking of a traditional immobiliser relay.




Stops key cloning and ECU swappingA thief cannot simply add a new key or replace an
ECU to bypass the Ghost and start the vehicle. Only
a correct PIN code will allow the engine to start.
Tested for each vehicle
Due to the nature of the data bus communication the
Ghost has been adapted and tested for every vehicle
we list as compatible. If we list your vehicle you can
be sure we have thoroughly tested its operation with
the Ghost.
Weatherproof tiny device
The Ghost is sealed and so small it can be installed
and wrapped into the vehicle harness anywhere in
the vehicle making it near impossible for a thief to
find.
Emergency PIN code override
If the PIN code is forgotten, the car is sold or a button
is broken there is a secure, unique reset code for
each device.
Service / Valet mode
Service mode allows your vehicle to temporarily start
and drive without requiring the PIN code. The Ghost
will exit service mode based on speed and time or by
simply entering the PIN code.
Simple PIN code change process
At any time you can easily change the PIN code. Only
you will know the unique PIN code for your vehicle.
Uses the vehicle’s original buttons to enter
the PIN code
The buttons in modern vehicles send data all around
the vehicle which allows us to detect many different
keys being pressed without extra wiring.



This system Includes on site installation in the price. Tracker requires annual subscription to mobile data network (First six months free).

Dash cameras - Please select the power connection required. Plug & Play dose not require an installation, it simply plug into the vehicles accessey socket. Hard wired requires connection to the vehicles fuse box or power supply.

Trackers - OBD tracker dose not require an installation, it simply plug into the vehicles accessey socket. Fleet & 1204 trackers are hard wired and require conection to the vehicles fuse box or power supply.

Please allow 3-7 working days for delivery.

Before returning any equipment, please call and obtain a RMA number and Return address.

With this product you are buying: Can-Bus Immobiliser+Tracker